[Siege of Orgrimmar] Iron Juggernaut

Erudax · Posted: 20-08-2016, 02:15:14 | Translate post to: ... (Click for more languages)

I only did 25N, so I'll speak out what I have seen.
1. Damage is wrong. It should have 700,000-750,000 on 25N.
2. Attack speed is wrong(?) or so it seems. It seems to swing way faster than other bosses.
3. When pulled to the left side, it falls under the textures. Accurate spot, made in paint:

Brigadee · Posted: 20-08-2016, 08:15:24 | Translate post to: ... (Click for more languages)

Churki wrote:

First: Cannons have to much range on the Splash Should be like 5-6 Yards not up to 8-10 Yards.

Nexflame wrote:

1. What Cannons?

Spoiler:

Churki wrote:

Third: The Drill Should do Physical Damage not Nature Damage.

Nexflame wrote:

3. Proof that it should do physical instead.

Spoiler:

makaveli123 · Posted: 20-08-2016, 08:49:49 | Translate post to: ... (Click for more languages)

"3. Proof that it should do physical instead."

- you ever open Dungeon Journal ?

magda · Posted: 20-08-2016, 10:27:18 | Translate post to: ... (Click for more languages)

also the canons should target only one player in 25 man not 3 as it is currently on freakz
proof: https://youtube.com/watch?v=WPPK8PLR6Ok:

Nexflame · Posted: 20-08-2016, 11:37:28 | Translate post to: ... (Click for more languages)

makaveli123 wrote:

"3. Proof that it should do physical instead."

- you ever open Dungeon Journal ?

You don't have to be a smart *** here, I just required some proof. Please stop posting here, you are welcome no more. Thanks.

magda wrote:

also the canons should target only one player in 25 man not 3 as it is currently on freakz
proof:

Fixed.

Churki wrote:

First: Cannons have to much range on the Splash Should be like 5-6 Yards not up to 8-10 Yards.

Now, and since we released it is exact 8 Radius. You can see it here: Radius: 8 yards

Churki wrote:

Third: The Drill Should do Physical Damage not Nature Damage.

Fixed.

Erudax wrote:

1. Damage is wrong. It should have 700,000-750,000 on 25N.

Fixed.

Erudax wrote:

Attack speed is wrong(?) or so it seems. It seems to swing way faster than other bosses.

It seems that every SoO Boss have 1.5 secs for a melee swing. This boss is no exception. Maybe this is caused by it's scale?. If you have proof that this is not OK, please come with a replay.

Magnus06 wrote:

In 10 man mode, it's applied on 3 targets at the same time every time instead of switching from one player to another when the buff fades off, also it should't target tanks.

Okey, i only understood the tank part. Please be more specific. And a proof for you that the boss should always target 3 targets with Laser burn: link

Magnus06 · Posted: 20-08-2016, 14:09:22 | Translate post to: ... (Click for more languages)

Nexflame wrote:

Magnus06 wrote:

In 10 man mode, it's applied on 3 targets at the same time every time instead of switching from one player to another when the buff fades off, also it should't target tanks.

Okey, i only understood the tank part. Please be more specific. And a proof for you that the boss should always target 3 targets with Laser burn: link

Nevermind, it can target tanks but that's because i main tanked from T11 to T12 heroic back in cataclysm and it was a fashion to have mechanics that couldn't affect tanks. This and the fact i was probably very tired. Really sorry for leading you into garbage intel.

From your link, the large amount of player in the gif clearly indicates this was a 25man raid and it's logical that the laser will target 3 players in 25 but i'm talking about 10 man difficulty where 3 targets for Laser burn is too much.

Quick math for ATM laser burn in 10n : 300k per target so 900k damage to heal quick and then (8 * 50k) * 3 = 1m2 damages to sustain in the following 16s and only with 2-3 healers let alone other capacities from the boss (mortar, borrer drill, stomped mines and falling damage, flame vents...).

https://youtube.com/watch?v=X-cEFLcPmiA:

See in the top left corner the raid is displayed with the dot beeing applied soon enough to both tanks (@ 0:50). Basically in 10 man difficulty, one target gets affected by Laser burn and a couple of seconds before it fades from Target A, it's rapplied on another target.

Nexflame · Posted: 20-08-2016, 14:11:47 | Translate post to: ... (Click for more languages)

Magnus06 wrote:

Nevermind, it can target tanks but that's because i main tanked from T11 to T12 heroic back in cataclysm and it was a fashion to have mechanics that couldn't affect tanks. This and the fact i was probably very tired. Really sorry for leading you into garbage intel.

From your link, the large amount of player in the gif clearly indicates this was a 25man raid and it's logical that the laser will target 3 players in 25 but i'm talking about 10 man difficulty where 3 targets for Laser burn is too much.

Quick math for ATM laser burn in 10n : 300k per target so 900k damage to heal quick and then (8 * 50k) * 3 = 1m2 damages to sustain in the following 16s and only with 2-3 healers let alone other capacities from the boss (mortar, borrer drill, stomped mines and falling damage, flame vents...).

See in the top left corner the raid is displayed with the dot beeing applied soon enough to both tanks (@ 0:50). Basically in 10 man difficulty, one target gets affected by Laser burn and a couple of seconds before it fades from Target A, it's rapplied on another target.

Fixed. Now it only affects 1 player in 10 man mode. Thanks

.

Seyrox · Posted: 20-08-2016, 14:45:28 | Translate post to: ... (Click for more languages)

It should be 1.5 swing timer

Quote:

00:00:00.484 Iron Juggernaut Melee Nnogga Parry

00:00:02.123 Iron Juggernaut Melee Nnogga Parry

00:00:03.570 Iron Juggernaut Melee Nnogga Parry

00:00:05.087 Iron Juggernaut Melee Nnogga Parry

00:00:06.589 Iron Juggernaut Melee Nnogga Parry

00:00:08.109 Iron Juggernaut Melee Nnogga Dodge

Demonolgy Warlock Guide 5.4.8

Daeron · Posted: 20-08-2016, 19:58:12 | Translate post to: ... (Click for more languages)

After the recent fixes you can't enter in Crawler Mines.

makaveli123 · Posted: 20-08-2016, 20:33:55 | Translate post to: ... (Click for more languages)

Confirm , you can't activate the mines by clicking them and you eventualy wipe from 3x mine damage. No proof, easy to check .

Nexflame · Posted: 20-08-2016, 21:03:17 | Translate post to: ... (Click for more languages)

makaveli123 wrote:

Confirm , you can't activate the mines by clicking them and you eventualy wipe from 3x mine damage. No proof, easy to check .

Fixed.

There is a problem while wiping in in #2 phase. The boss enters Evade Mode and cannot interact with him anymore. #sadpanda

saturnfever · Posted: 20-08-2016, 22:49:38 | Translate post to: ... (Click for more languages)

Nexflame wrote:

makaveli123 wrote:

Confirm , you can't activate the mines by clicking them and you eventualy wipe from 3x mine damage. No proof, easy to check .

Fixed.

There is a problem while wiping in in #2 phase. The boss enters Evade Mode and cannot interact with him anymore. #sadpanda

idk if this requires a server restart, but it still doesn't work. cant click on bombs

Nexflame · Posted: 20-08-2016, 22:50:36 | Translate post to: ... (Click for more languages)

saturnfever wrote:

idk if this requires a server restart, but it still doesn't work. cant click on bombs

Indeed. A server restart is required.

Daeron · Posted: 20-08-2016, 23:16:54 | Translate post to: ... (Click for more languages)

Iron Juggernaut isn't placed corectly.
https://youtube.com/watch?v=PgPC65C0NZg:

Churki · Posted: 21-08-2016, 23:36:39 | Translate post to: ... (Click for more languages)

So far so good i found out some new shit

First = Demolisher cannons should be not used in phase 1 and boss is doing this..

Second = the flame veints hitting targets that are standing behind the boss or on the side it should be a cone in the front that hitting tanks.

Greetings Churki

[img]https://imgur.com/a/rxf33[img]