Login issues

SilentKillerTeo · Posted: 07-01-2018, 14:56:25 | Translate post to: ... (Click for more languages)

hello, i've been facing the login issue attached in the photo, i have followed all the indications in the link:https://forum.wow-freakz.com/WoW-Legion-client-t452441.html and it didnt fix anything.
i have also did the following fixes:
1) restart router + pc
2) router dmz thing
3)launch as administrator with and without firewall
4)i gave freakz launcher permission on firewall
5) reinstall full freakz client and did the same things i mentioned before
and it still isn't fixed.
if you can give me any more suggestions i thank you very much.
link for the photo that describes the error: http://prntscr.com/hx6q4d.

Shocker · Posted: 07-01-2018, 15:27:41 | Translate post to: ... (Click for more languages)

Connection from our server to your IP address is OK, just checked, which means this is a problem with your router blocking your ports (or proxy settings)

FREAKZ COMMUNITY @ Facebook
WOW FREAKZ @ Facebook

SilentKillerTeo · Posted: 07-01-2018, 15:29:00 | Translate post to: ... (Click for more languages)

Shocker wrote:

Connection from our server to your IP address is OK, just checked, which means this is a problem with your router blocking your ports (or proxy settings)

Thanks for the information, what do you suggest for further solving the problem with the router? Thanks in advance.

Shocker · Posted: 07-01-2018, 16:09:12 | Translate post to: ... (Click for more languages)

I'm 99% sure you didn't do DMZ / port unblocking correcttly or still have proxy settings (check the https://www.wow-freakz.com/legion_download topic)

FREAKZ COMMUNITY @ Facebook
WOW FREAKZ @ Facebook

SilentKillerTeo · Posted: 07-01-2018, 17:47:43 | Translate post to: ... (Click for more languages)

Shocker wrote:

I'm 99% sure you didn't do DMZ / port unblocking correcttly or still have proxy settings (check the https://www.wow-freakz.com/legion_download topic)

A little update, I think I have configured DMZ and unblocked the ports, I have attached some pictures of the overview in every way:
1) Reserved local address for my computer;
2) Unblocked the suggested ports, as seen in this picture: http://prntscr.com/hx8dnb;
3) Enabled DMZ on my computer's local address which i have reserved: http://prntscr.com/hx8dvx;
4) Allowed access to said ports in Windows Firewall: http://prntscr.com/hx8eia;
The problem isstill not solved. If I did something wrong, I would appreciate some guidance. Thanks in advance.
P.S: I do not know what you meant by proxy settings.

SilentKillerTeo · Posted: 08-01-2018, 22:01:44 | Translate post to: ... (Click for more languages)

Solved.

Shocker · Posted: 09-01-2018, 01:22:54 | Translate post to: ... (Click for more languages)

SilentKillerTeo wrote:

Solved.

What was the issue?

FREAKZ COMMUNITY @ Facebook
WOW FREAKZ @ Facebook

SilentKillerTeo · Posted: 09-01-2018, 04:00:10 | Translate post to: ... (Click for more languages)

Shocker wrote:

SilentKillerTeo wrote:

Solved.

What was the issue?

I don't really know, I didn't to anything special beside what I described and it didn't work right away even after shutdown/restart. In the next morning (January 8th) it worked completely fine, and after a windows reinstall too.
EDIT: Thanks for the support.